New Beetle L4-2.0L (AVH) (2005)
-
Loosen bolts - 2 - and press clamps apart.
-
Push window upward and secure in position (e.g. with adhesive tape).
-
Remove operating lever for hood lock (drivers side only).
-
Remove A pillar lower trim.
-
Disconnect multi-pin connectors - 1 - on A pillar - 2 -.
-
Remove cover - 1 - for wiring harness - 2 - out of body opening in the inner A pillar.
-
Pull wiring harness out of A pillar at boots - 1 - between door and A pillar.