New Beetle L4-2.0L (AVH) (2005)
-
Disconnect connectors - 1 - and - 2 -.
-
Lift hooks - arrows - carefully and remove steering angle sensor G85.
Installing
The steering angle sensor G85 must be set to its centered position before installing.
-
Position steering angle sender G85 and push down until the lugs engage.
-
Remove transportation protection.
-
A yellow mark must be visible in hole - arrow 1 -.
-
The marks - arrows - must also align.
Make sure it does not move from center position.
Installation is carried out in reverse sequence of removal.
-
Install airbag unit and steering wheel.
-
Perform basic setting for steering angle sender G85.