New Beetle L4-2.0L (AVH) (2005)
/Page-629003.png)
^
Axial clearance
-
New: 0.05 to 0.31 mm
-
Wear limit: 0.37 mm
^
Check radial clearance with Plastigage:
-
New: 0.01 to 0.06 mm
-
Wear limit: 0.12 mm
^
Do not rotate crankshaft when checking radial clearance
9 - Cylinder block
10 - Connecting rod bolt
11 - Circlip
12 - Piston pin
^
If difficult to remove, heat piston to 60°C
^
Remove and install with VW 222 A
Checking piston ring gap
Special tools, testers and auxiliary items required
^
Feeler gauges
Work sequence
-
Push ring squarely from above down to approx. 15 mm from bottom end of cylinder.
