New Beetle L4-2.0L (AVH) (2005)
6 - Cylinder block
7 - 60 Nm plus 1/4 turn (90°)
^
Replace
8 - Flywheel/drive plate
^
To remove and install flywheel counterhold with 3067
9 - Intermediate plate
^
Must be located on dowel sleeves
^
Do not damage/bend when assembling
10 - Sealing flange - transmission end
^
Only replace complete
^
Before removing, remove flywheel or drive plate and oil pan
^
Use protective sleeve supplied when installing
^
Do not additionally oil or grease oil seal sealing lip
^
Before installing, remove oil residue from crankshaft journal using a clean cloth
^
Remove protective sleeve first after sealing flange has been slid onto crankshaft journal
Installation position of intermediate plate
^
Fit intermediate plate onto sealing flange and slide onto dowel sleeves - arrows -.