New Beetle L4-2.0L (AVH) (2005)
Fig. 1 Installation position of double clamp
Work procedure
-
Position new double clamp as shown with approx. 5 mm distance to marking -A- and secure it.
Tightening torque 40 Nm
-
Marking A (arrow -1-) for vehicles with automatic transmission
-
Marking S (arrow -2-) for vehicles with manual transmission
Fig. 2 Installation position of muffler suspension
Angled side at foot of suspension (arrow) faces front of vehicle.
Fig. 3 Separation point at exhaust pipe
Recommended special tools and equipment
-
Body saw, e.g. V.A.G1523
Work procedure
-
Separate exhaust pipe at right angle to separation point (arrow -2-).