New Beetle L4-2.0L (AVH) (2005)
Condenser HVAC: Service and Repair
Condenser, Removing and Installing
First do the following:
-
Discharge refrigerant system
-
Drain coolant
-
Disconnect refrigerant pipes at condenser
CAUTION: Immediately plug open connections on A/C components to prevent dirt and moisture contamination.
-
Bring front end assembly (lock carrier) into service position.
1. Radiator
-
Always use new coolant after replacement
2. Condenser
3. Bolt
-
8 Nm (71 in lb)
4. Lock carrier
-
Bring into service position