New Beetle L4-2.0L (AVH) (2005)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb, Replacing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Disconnect electrical connection at fog lamp assembly.
-
Turn sealing cap on rear of assembly and remove.
-
Disconnect electrical connection from fog lamp bulb.
-
Release spring retaining clip.
-
Remove bulb from reflector.
Installing
CAUTION: Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation, can cause the glass to cloud over.
-
Insert new bulb so lugs on plate align with grooves in reflector.
-
Connect electrical connection to bulb and reinstall cap, on assembly.
-
Connect electrical connection to fog lamp assembly.
-
Check fog lamp aim.