New Beetle L4-2.0L (AVH) (2005)
Headlamp Alignment Sensor: Service and Repair
Left Rear Level Control System Sensor -G76-, Removing and Installing
Left Rear Level Control System Sensor -G76-, Removing and Installing
Removing
-
Remove nuts -arrows-.
-
Remove sendsor with retainer.
-
Disconnect electrical connections.
Installing
Installation in reverse sequence of removal.
When installing, ensure coupling rod angle bracket on rear axle is seated correctly.
NOTE: The rear level control system sensor is not externally adjustable. However, it must be checked after installation is complete,
-
Check rear level sensor adjustment.