New Beetle L4-2.0L (AVH) (2005)
-
Disconnect connector from Multi-Function Transmission Range (TR) switch -F125-
-
Remove mounting bolt and retainer.
-
Remove Multi-Function Transmission Range (TR) switch.
-
Replace O-ring.
Installation is performed in reverse order of removal.
-
Tighten bolt to 10 Nm.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
Replacing Multi-Function Transmission Range (TR) switch -F125- (vehicles with 09G transmission)
Removing
-
Remove air filter housing.
-
Pry off selector lever cable -1- from shift rod -4- using an open-end wrench 10 mm.
-
Compress locking mechanism (arrows) and pull selector lever cable out of mounting bracket.
-
Disconnect connector -2- from Multi-Function Transmission Range (TR) switch -F125-