New Beetle L4-2.0L (AVH) (2005)
Seat Belt Tensioner: Service and Repair
Passive Occupant Detection System (PODS) (USA), Removing and Installing
Passive Occupant Detection System (PODS) (USA), Removing and Installing
Removing
NOTE:
-
All cables that are disconnected in order to remove PODS must be reconnected in original position when PODS is replaced.
-
Before working with PODS system, observe how all cables are connected and routed.
-
Disconnect battery ground (GND) strap.
-
Remove front passenger's seat (install airbag adapter VAS 5094).
-
Remove screw -arrow- on inner side of seat
-
Remove plastic rivet -1- on front part of seat
-
Remove plastic cover -2- by unclipping it from lower part of seat -3-.
-
Remove screw -arrow-