New Beetle L4-2.0L (AVH) (2005)
-
Indicated on Vehicle Diagnosis, Testing and Information System VAS 5051:
-
Read ATF temperature in display zone - 1 -.
Checking ATF level
Note:
-
The ATF level is checked at the ATF control plug.
-
The ATF level is correct when ATF leaks slowly out of the opening at an ATF temperature between 35°C and 45°C (50°C for hot climates) due
to the expansion of the fluid when heated.
Note: Ensure that the ATF filler tool V.A.G1924 is clean and do not mix the ATF with other ATF oils.
-
Secure reservoir of ATF filler tool V.A.G1924 to vehicle.
-
Drive vehicle onto a four-post lifting platform so that vehicle is absolutely level.
-
Remove sound insulation - arrows -.
-
Position drip tray V.A.G1306 underneath.
-
Start engine and run at idling speed.
CAUTION: Wear eye protection.