New Beetle L4-2.0L (AVH) (2005)
-
Multi-function Transmission Range (TR) switch -F125- securing bolts are loosened
-
Selector shaft lever is removed.
Work sequence
-
Mount setting gauge onto selector shaft - 2 - and turn multi-function TR switch - 1 - until gauge locks into lug on multifunction
-
TR switch connector.
-
Secure setting gauge onto selector shaft - 2 - with bolt - 3 -.
-
Tighten bolts - arrows - to 6 Nm.
-
Remove setting gauge.
-
Install in reverse order.