New Beetle L4-2.0L (AVH) (2005)
-
Check wires between test box and 8-pin connector to Transmission Control Module (TCM) for open circuit according to wiring diagram.
Terminal 5 + socket 38
Terminal 6 + socket 50
Wire resistance: max. 1.5 Ohms
-
Check wires for short circuit to each other.
Specified value: Infinite Ohms
If no malfunctions are found in wires:
-
Replace Sender for transmission output RPM -G195-.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic
Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes