New Beetle L4-2.0L (AVH) (2005)
/Page-1451004.png)
-
Turn overcenter spring together with assembly device T10111 in direction of arrow -A- and take out downward in direction of arrow -B-.
Installing
-
Pull clutch pedal toward inside of vehicle.
-
Fit overcenter spring together with assembly device T10111 in direction of arrow -A- into support. When doing this turn in direction of arrow -B-.
-
Fit overcenter spring on support in rear -arrow A-.
-
Press clutch pedal to bulkhead until overcenter spring lies against clutch pedal bearing tab (arrow -B-).
