New Beetle L4-2.0L (AVH) (2005)
Special tools and equipment
Seal and sleeve are driven out in one piece
-
T10148 Press piece
-
3066 Assembly device
-
VW 771 Multi-purpose tool
-
VW 771/37 Puller hooks
-
V.A.G 1331 Torque wrench
Removing
-
Remove center and left noise insulation tray under engine/transmission if installed.
-
Turn steering to right onto full lock stop
-
Remove drive shaft protective cover from engine if installed
-
Disconnect drive shaft -1- from flange shaft.
-
Tie-up drive shaft as high as possible. Do not damage paint on drive shaft.
-
Place container under transmission and engine.
-
Disconnect oil return line for turbocharger from engine, if installed (arrow).