New Beetle L4-2.0L (AVH) (2005)
-
Separate front exhaust line -A-.
-
Remove cross support -B- below exhaust system.
-
Unscrew exhaust manifold from subframe (arrows) and unhook it.
-
Loosen heat shield -C- in forward area.
-
Remove heat shield -D-.
-
Unbolt selector housing from body.
-
Swing shift housing down and remove with selector cables.
Installing
Installation is performed in the reverse sequence. Note the following:
The cable locks have holes for securing them on the gear selector lever or the relay lever.