New Beetle L4-2.0L (AVH) (2005)
Wiper Arm: Adjustments
Wiper Blade Contact Angle, Checking and Adjusting
Wiper Blade Contact Angle, Checking and Adjusting
NOTE: Check contact angle only if wiper blades skip (judder) or make noises.
Special tools and equipment
-
Wiper arm setting device 3358B
-
24 mm open end wrench
-
Torque wrench
-
Bring wiper arm to park position.
-
Remove wiper blade.
-
Insert wiper arm -2- into wiper arm setting device 3358B and secure with locking screw -3-.
-
Check contact angle.
Contact angle (specification)
Driver's side
- 3 degree
Passenger's side
- 3 degree
Tolerance
± 2 degree
Adjust contact angle to specification, if required, as follows: