New Beetle L4-2.0L (AZG) (2003)
Brake Light Switch: Adjustments
Adjusting Brake Light Switch
Adjusting brake light switch
Remove brake light switch to adjust.
-
Disconnect connector off brake light switch.
-
Remove brake light switch by turning 45°to the left.
-
Before installing, pull plunger fully out.
-
Guide brake light switch through assembly opening and reinstall by pressing against the pedal and turning 45° to the right.
Brake pedal always remains in rest position.
-
Install brake light switch connector.
-
Check function of brake light.
After adjusting brake light switch, make sure the brake pedal is in the end stop position (released position).