New Beetle L4-2.0L (AZG) (2003)
/Page-126002.png)
NOTE: Multi-point socket-head bolts that already have five center punch marks must be replaced.
-
Position steering wheel -2- in center position (wheels straight ahead).
-
Remove steering wheel -2- off steering column.
-
Remove two Phillips-head screws (arrows).
-
Remove upper steering column switch trim -1-.
-
Remove four Phillips-head screws (arrows).
-
Remove socket head hex bolts -1-.
-
Release steering wheel height adjustment -2-.
-
Remove lower steering column switch trim -3-.
