New Beetle L4-2.0L (AZG) (2003)
Rapid data transfer
Q
08 - Read measuring value block
-
Press -Q- button to confirm input.
Indicated on display:
Read measured value block
Enter display group number XXX
-
Press key 0 twice and press key 2 once to select display group number 002.
-
Press -Q- button to confirm input.
Indicated on display e.g.:
Read measuring value block 2
2.1 2.4 ADP. O.K.
-
Loosen lower securing bolt -arrow- on coupling rod of front axle.
-
Move coupling rod within elongated hole until specification of 1.0 to 2.0 Volt is displayed in display zone 1 of the Read measuring value block.
Optimum specification = 1.0 Volt (if possible).
-
Tighten securing bolt. When doing this ensure voltage remains as close to optimum tolerance of 1.0 Volt as possible.
Indicated on display after completion of adjustments e.g.:
Read measured value block 2
->
1.0 2.2 ADP. O.K.
-
Press -> key.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press keys 0 and 6 to select "End output" function 06.
Indicated on display:
Rapid data transfer
Q
06 End output
-
Press -Q- button to confirm input.
Indicated on display: