New Beetle L4-2.0L (AZG) (2003)
/Page-170001.png)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range (TR) Switch F125-
Location: on rear of transmission
Removing and installing multi-function TR switch
^
Switch off ignition.
^
Pull connector off multi-function TR switch.
^
Remove bolt and retainer.
^
Remove multi-function TR switch.
^
Replace seal.
Installation is performed in the reverse order.
^
Tighten bolt to 10 Nm (7 ft. lbs.).
