New Beetle L4-2.0L (AZG) (2003)
-
Remove bolts -1- and -2-.
-
Move power steering fluid reservoir to the side (do not disconnect lines).
-
Remove bolt -3- and remove battery hold- down bracket.
-
Carefully slide battery with insulation enclosure -A- to the left, and lift from engine compartment.
Installing
To be sure the battery seats securely, only install batteries with a 10.5 mm battery foot strip and adhere to the following work sequences:
-
Install battery with insulation enclosure so lug of battery carrier (arrow) engages in battery groove -1-.
-
It must not be possible to move the battery to the left or to the right.