New Beetle L4-2.0L (AZG) (2003)
/Page-1134005.png)
Refer to Brakes and Traction Control; Servicing front brake caliper. FS III brake caliper
CAUTION:
^
Do not loosen the brake hose when working on the front suspension
^
Suspend the brake caliper using a piece of wire or similar.
^
Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and damage the hose.
13. Ventilated brake disc
14. Wheel bolt
^
120 Nm (88.5 ft. lbs.)
15. Self-locking 12-point nut
^
Always replace
16. Phillips-head screw
^
4 Nm (35 inch lbs.)
17. Brake carrier
18. Brake caliper Vehicles with 110 kw(150 Hp) gasoline engines
CAUTION:
^
Do not loosen the brake hose when working on the front suspension
^
Suspend the brake caliper using a piece of wire or similar.
^
Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and damage the hose.
19. Self-locking combi bolt
^
125 Nm (92 ft. lbs.)
^
Clean ribs on under side of bolt head
20. Wheel bearing housing
^
Vehicles with 110 kw (150 Hp) gasoline engines
21. Self-locking nut
^
45 Nm (33 ft. lbs.)
22. Ball joint
23. Self-locking nut, 45 Nm (33 ft. lbs.)
^
Always replace
^
45 Nm (33 ft. lbs.)
24. Hex. bolt
^
Always replace
25. Socket-head bolt
^
8 Nm (71 inch lbs.)
26. ABS wheel speed sensor
^
Before inserting sensor, clean installation hole inner surface and coat with lubricating paste G 000 650
27. Drive axle
Fig. 1 Pressing wheel hub out of wheel bearing housing
