New Beetle L4-2.0L (AZG) (2003)
/Page-863003.png)
Special tools and equipment
^
VAG 1331 Torque wrench
^
VAG 1332 Torque wrench
^
VAG 1410 Torque wrench
CAUTION:
^
If a vehicle has to be moved after removing the drive axle, first install the outer CV joint and tighten the nut to 50 Nm (37 ft. lbs.). Otherwise the
wheel bearing will be damaged.
^
Do not attempt to weld or straighten the load bearing suspension components, or components that locate the wheels.
^
Always replace self-locking nuts.
^
Always replace corroded nuts/bolts.
