New Beetle L4-2.0L (BEV) (2004)
Sunroof / Moonroof Track: Adjustments
Parallel Running, Adjusting
NOTE: The parallel running adjustment can only be undertaken when the drive and glass panel are removed ("0" position).
-
Remove sunroof.
The mark -arrow- on the rear of the guide upper section -1- must, on both sides, lie within the marks -dimension a- on the guide rail gate -2-.
The slotted guide rail -2- must be located in the guide rails (cannot be moved by hand).
-
Slide guide upper part -1- from front to rear only centrally between the marks.
-
Install drive in this position ("0" position).
Then check "0" position.