New Beetle L4-2.0L (BEV) (2004)
Brake Caliper: Service and Repair
Front
Brake Calipers, Servicing
FS III Front brake calipers, servicing
Note:
^
When carrying out repairs install all parts supplied in repair kit.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply thin coat of lubricant G 052 150 A2 to brake cylinders, pistons and seals.
1. Protective seal
2. Bleed valve
^
Apply thin coat of assembly lubricant G 052 150 A2 to threads before screwing in
3. Cap
^
Insert in mounting bushing
4. Guide pins, 28 Nm (21 ft. lbs.)
5. Mounting bushing
^
Insert into brake caliper housing
6. Brake caliper housing
7. Protective seal
^
Do not damage when inserting piston
8. Piston
^
Apply thin coat of lubricant G 052 150 A2 to piston before inserting
9. Seal
Brake Caliper Piston, Removing and Installing
FS III Front brake caliper piston, removing and installing
Special tools and equipment