New Beetle L4-2.0L (BEV) (2004)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools, equipment, testers, measuring instruments and auxiliary items required
^
T10007 Refractometer
^
VAG1306 Drip tray
^
VAG1331 Torque wrench (5...50 Nm)
^
VAS5024 Assembly tool for spring-type clamps
Removing
Note:
^
Always replace seals and gaskets.
^
The lower section of the toothed belt guard need not be removed.
^
The toothed belt should be left in position on the crankshaft pulley.
^
Cover the toothed belt with a cloth to protect it from coolant before removing the coolant pump.
^
Drain coolant.
^
Remove ribbed belt.
^
Remove tensioning element for ribbed belt.
^
Remove upper and center sections of toothed belt guard.
^
Take toothed belt off coolant pump toothed belt pulley.