New Beetle L4-2.0L (BEV) (2004)
^
Unscrew securing bolt -1- for rear toothed belt guard -2-.
^
Unscrew securing bolts -5- for coolant pump and remove coolant pump -4 -
Installing
Installation is performed in the reverse sequence. Note the following:
^
Moisten new O-ring -3- with coolant.
^
Install coolant pump -4-. Installation position: Coolant pump sealing plug faces downward.
^
Tighten securing bolts -5- to 15 Nm.
^
Tighten securing bolt -1- for rear toothed belt guard -2- on cylinder head to 20 Nm
Installing toothed belt and adjusting timing.
^
Install ribbed belt tensioning element and torque to 25 Nm.
^
Install ribbed belt.
^
Fill with coolant.