New Beetle L4-2.0L (BEV) (2004)
/Page-901001.png)
Canister Purge Control Valve: Testing and Inspection
Evaporative Emission (EVAP) Canister Purge Regulator Valve, Checking
Solenoid valve is closed when no voltage is present.
Recommended special tools and equipment
-
VAG 1526 multimeter or VAG 1715 multimeter
-
VAG 1594 connector test kit
-
Wiring diagram
Test requirements
-
The respective fuses of Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80- must be OK.
-
Ignition switched off.
Test sequence
-
Disconnect 2-pin connector from Evaporative Emission (EVAP) canister purge regulator valve -N80- (arrow).
-
Measure resistance between terminals of solenoid valve. Specified value: 22.0...30.0 Ohms
If specified value is not obtained:
-
Replace Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-:
