New Beetle L4-2.0L (BEV) (2004)
Fuel Pressure Regulator: Locations
Evaporative Emissions (EVAP) system, assembly overview
Engine codes BEV, BGD
1. Tank flap unit
2. Fuel tank
3. Fuel delivery unit
4. Intake hose
5. Throttle valve control module -J338
6. Intake manifold upper part
7. Fuel rail with injectors
8. Fuel filter
^
Installed position: Arrow points in direction of flow
^
With fuel pressure regulator
9. EVAP canister purge regulator valve -N80-
^
On right in engine compartment above wheelhousing liner
^
Installed position: Arrow points in direction of flow
^
Valve will be activated by engine control module (pulsed)
10. Gravity valve
11. Pressure retention valve
^
For fuel tank breather
^
Checking; Refer to Fig. 3
12. Change-over valve
^
Checking; Refer to Fig. 2
13. EVAP canister
^
In right rear wheelhousing, behind wheelhousing liner
14. Leak Detection Pump (LDP) -V144
^
In right rear wheelhousing, behind wheelhousing liner
^
Valve will be activated by engine control module (pulsed)