New Beetle L4-2.0L (BEV) (2004)
/Page-1420001.png)
Alignment: Specifications
Ride Height
Vehicle transverse inclination "Zero position"
If the measured values exceed tolerances, the cause may be an incorrect vehicle attitude.
Example: vehicles with an automatic transmission can lean to one side slightly.
This is due to the installation position of the assemblies and their associated weight transfer and is normal.
-
If vehicle leans to one side, measure dimension "a" on left and righthand sides.
-
Correct differences if necessary.
^
On front axle, compensate by adding weight to top of relevant strut tower.
^
On rear axle, compensate by adding weight to relevant side of luggage compartment.
^
Sand filled bags weighting approx. 10 kg (22 lbs.) are suitable for this.
