volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Steering Pump, Removing and Installing|Page 6606 > < Power Steering Pump, Removing and Installing|Page 6604
Page 1
background image

Power Steering Pump: Service and Repair
Pump Assembly, Overview

Vehicles With Pump In Lower Section

Power steering pump in lower section, assembly overview 

Vehicles with power steering pump in lower section 
1. Bracket
2. Hex. bolt

^

25 Nm (18 ft. lbs.) 

3. Banjo bolt

^

38 Nm (28 ft. lbs.) 

4. Pressure hose
5. Seal

^

Always replace

6. Suction hose
7. Hose clamp
8. Power steering pump

^

Before installing fill with oil

9. Belt pulley

10. Socket-head bolt

^

25 Nm (18 ft. lbs.) 

11. Ribbed belt 

^

Mark the direction of travel using a crayon or marker before removing the ribbed belt. Reinstalling a used belt in the opposite direction could
damage the belt. 

^

When installing the belt, make sure that it is correctly seated in the pulleys. 

^

Determine parts number from Parts Supplier 

^

Removing and belt routing, Refer to Engine, Drive belt, Service and Repair  

^

Checking condition 

-

Maintenance Manual; Checking condition of ribbed belts

Power Steering Pump, Removing and Installing|Page 6606 > < Power Steering Pump, Removing and Installing|Page 6604