New Beetle L4-2.0L (BEV) (2004)
Fig. 5 Pulling bearing inner race off stub axle
Only use puller with a tightening clamp -A-, (e.g. Kukko 204-2) (commercially type).
Fig. 6 Pulling wheel bearing/wheel hub unit onto stub axle
-
Install wheel bearing/hub unit as far as possible onto stub axle.
-
Install assembly tool 3420 and pull wheel bearing/wheel hub unit on to limit stop.
-
Remove assembly tool 3420.
Fig. 7 Securing wheel bearing and hub unit
-
Install new 12-point nut -A- and tighten it to 175 Nm (129 ft. lbs.).
-
Install brake disc.
Fig. 8 Driving in dust cap