New Beetle L4-2.0L (BEV) (2004)
-
Install ball hub over both chamfers into ball cage. The hub can be installed in any position. Press balls into cage.
-
Install hub together with cage and balls at right angle to joint.
Notes:
^
When installing make sure that the wide spacing -a- on the joint housing is aligned with the narrow spacing -b- on the hub after swiveling in.
^
The chamfer on the inner diameter of ball hub (splines) must face the larger diameter of joint housing.
-
Swivel in ball hub, hub must be swiveled out of cage -arrows- far enough to allow balls to install into ball tracks.