New Beetle L4-2.0L (BEV) (2004)
/Page-1188001.png)
Shifter M/T: Service and Repair
Gear Selector Mechanism, Removing and Installing
Gear selector mechanism, removing and installing
^
Remove securing clip -3- for gear selector cable from gear selector lever -1-
^
Remove securing clip -4- for gate selector cable from relay lever -2-.
^
Pry gate selector cable and gear selector cable off pin (arrows).
^
Remove cable support bracket from transmission (arrows). If necessary unclip hose at cable support bracket first.
^
Carefully pry cover off center console (arrows).
^
Pull cover to rear off center console.
^
Remove sound insulation.
