New Beetle L5-2.5L (BPR) (2007)
/Page-2758002.png)
5)
Assemble rear bumper module starting from call-out number 1 to call-out number 10 (from center to both sides of the bumper cover) as shown in
the illustration
6)
Tighten the rest of the screws of the bumper module, following the sequence indicated in the Repair Manual Group 53 Body in ElsaWeb.
Warranty
* Code per warranty vendor code policy.
Required Parts and Tools
No Special Tools required.
No Special Parts required. Always see ETKA for the latest part(s) information.
