New Beetle L5-2.5L (BPR) (2007)
Lock Carrier: Procedures
Lock Carrier Service Position
-
Remove front part. Refer to=> [ Front Part Assembly Overview ] See: Fender/Front Fender/Service and Repair/Front Part Assembly Overview.
-
Disengage hood release cable at lock.
-
Remove one bolt each - 2 - from longitudinal members and bolt in Support Tool (3411) at right and left longitudinal members for this.
-
Remove bolts - 1 - and - 3 - at left and right and pull lock carrier toward front in area of Support Tool (3411).