New Beetle L5-2.5L (BPR) (2007)
-
Install outer brake pad on brake carrier.
-
Remove protective foil on backing plate of outer brake pad.
-
Tighten brake caliper housing to brake carrier using both guide pins.
-
Install both protective caps.
-
Install retaining spring in brake caliper housing.
-
Attach brake hose to brake caliper housing.
-
Remove brake pedal actuator (V.A.G 1869/2).
-
Insert connector for brake pad wear indicator into bracket at suspension strut.
-
Bleeding brake system:
‹› Vehicles with ABS Mark 60 from 10.00 => [ Brake System Bleeding General Information ] See: Brake Bleeding/Service and Repair/Brake