New Beetle L5-2.5L (BPR) (2007)
Brake Booster Vacuum Sensor: Service and Repair
ABS Wheel Speed Sensor
Front Axle
ABS Wheel Speed Sensor
Removing
-
Raise vehicle.
-
Disconnect harness connector - 1 - from wheel speed sensor wire and wheel speed sensor.
-
Remove bolt - 2 - from wheel bearing housing.
-
Disconnect ABS wheel speed sensor from wheel bearing housing.
Installing
-
Before inserting wheel speed sensor, clean inner surface of hole and coat sensor completely with securing grease (G 000 650 ).
-
Insert wheel speed sensor in hole of wheel bearing housing and tighten bolt to 8 Nm.
-
Connect wheel speed sensor and sensor wire.
-
Turn wheels completely to left and right stop positions and check clearance to ABS wheel speed sensor wiring.
Rear Axle
ABS Wheel Speed Sensor
Removing
-
Raise vehicle.
-
Disconnect harness connector - 1 - from wheel speed sensor wire and wheel speed sensor.