New Beetle L5-2.5L (BPR) (2007)
Piston Ring: Specifications
Piston and Cylinder Dimensions
Note: Cylinder bore must not be measured if cylinder block is secured to engine stand with Engine Lateral Bracket T03001, or else results may be
incorrect.
Piston and cylinder dimensions
*
Measurement does not include graphite coating (thickness = 0.02 mm). The graphite coating wears off.
Piston Ring Gaps
Ring to Groove Clearance
Piston Inspection
Take measurement approx. 10 mm from lower edge of piston skirt and offset 90° to piston axis.
Deviations from nominal dimension ............................................................................................................................................................ max. 0.04 mm
Cylinder Bores