Volkswagen Workshop Service and Repair Manuals

Installing

CAUTION!
Make sure the seal is seated properly when installing the Left HID Lamp Control Module (J343). It is destroyed by ingress of water into
headlamp.

Install in reverse order of removal, noting the following:

-

Tighten the screws to the tightening specification. Refer to => [ HID Assembly Overview ] See: Headlamp/Service and Repair/Removal and
Replacement/HID Assembly Overview.

-

Make sure the headlamp is working correctly.

-

Perform basic setting of headlamp, refer to => [ HID Headlamp, Basic Setting ] See: Headlamp/Service and Repair/Procedures/HID Headlamp,
Basic Setting.