New Beetle L5-2.5L (BPR) (2007)
Headlamp Alignment Sensor: Testing and Inspection
Left Rear Level Control System Sensor G76, Checking
NOTE: The rear level control system sensor is not externally adjustable. However, it must be checked after installation is complete,
Special tools, testers and auxiliary items required
-
Vehicle Diagnostic Testing and Information System VAS 5051 / VAS 5052.
Prerequisites
-
Vehicle must be standing on all four wheels on a flat level surface.
-
Handbrake lever must be in off position and a drive gear must not be selected.
-
Steering must be in straight-ahead position.
-
Vehicle must be unoccupied and not loaded.
-
Vehicle must not be moved during basic settings process (i.e.: opening and closing of doors, people leaning on vehicle, people entering vehicle is
not permitted).
-
If vehicle was raised using a lifting platform/hoist or a vehicle/workshop jack, then it must be rolled back and forth several times so that the
springs etc. settle, before starting adjustments.
-
Vehicle Diagnostic Testing and Information System VAS 5051 /VAS 5052, selecting functions.
-
See On Board Diagnostic Function