volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 3123 > < Procedures|Page 3121
Page 2
background image

‹› Replace

4

Oil Pressure Switch (F1), 20 Nm

‹› 1.4 bar, black

‹› Checking, refer to => [ Oil Pressure and Switch, Checking ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine Oil

Pressure/Testing and Inspection.

5

from Intake Hose

‹› See - item 1 - in => [ Intake Tube ] See: Air Cleaner Housing/Service and Repair/Removal and Replacement. 

6

Vent Hose

‹› Due to 4 point lock, only disconnect when the oil filter bracket is to be removed.

7

Dust Cap

8

Oil Filter Housing, 25 Nm

‹› Remove and install using oil filter wrench (3417 ).

‹› Draining, refer to => [ Oil Filter Housing, Draining ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter Housing/Service

and Repair.

9

Seal

‹› Replace

‹› Insert when oiled.

‹› Note the installed position:

Service flag must be at the top.

10

Oil Filter Element

‹› Drain the oil filter housing before removing, refer to => [ Oil Filter Housing, Draining ] See: Engine, Cooling and Exhaust/Engine/Engine

Lubrication/Oil Filter Housing/Service and Repair.

11

Gasket

‹› Replace

12

Oil Cooler

‹› See note in => [ General Repair Information ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Description and

Operation/General Repair Information.

‹› Ensure sufficient clearance to surrounding components.

‹› Coolant hose connection diagram, refer to => [ Coolant Hose Connection Diagram ] See: Diagrams/Mechanical Diagrams/Cooling

System/System Diagram.

13

Bolt, 25 Nm

14

to Thermostat Housing

15

Gasket

‹› Replace

Engine Oil, Draining or Extracting, Changing Oil Filter and Filling Oil

Procedures|Page 3123 > < Procedures|Page 3121