New Beetle L5-2.5L (BPR) (2007)
/Page-1425003.png)
-
Pull Shift Lock Solenoid (N110) out of pawl - arrow B -.
-
Remove Shift Lock Solenoid (N110) downward.
Installing
Installation is performed in reverse order of removal. Note the following:
-
Engage Shift Lock Solenoid (N110) into pawl - arrow B -.
-
Clip Shift Lock Solenoid (N110) into retainer- arrows A -.
-
Tightly screw cover with bonded seal onto selector mechanism housing. While doing this, make sure seal makes correct contact.
-
First tighten nuts - arrows A -.
