New Beetle L5-2.5L (BPR) (2007)
8
Vent Line
‹› White
‹› Ensure the line is securely seated.
‹› Clipped to the side of the fuel tank.
9
from Evaporative Emission (EVAP) Canister
10
to EVAP Canister
11
Damming Valve
‹› To remove, remove the fuel tank.
‹› To remove, compress the retaining tabs.
‹› Forces flow in direction of the filler tube.
12
Check Valve for Fuel Pump
‹› Checking, refer to => [ Fuel Pump Checking, Engine Code BPR (Metal Fuel Tank) ] See: Fuel Delivery and Air Induction/Fuel Pump/Testing
and Inspection/Fuel Pump Checking, Engine Code BPR (Metal Fuel Tank).
13
to Suction Jet Pump
‹› Suction jet pump is located on the fuel tank to bleed the fuel tank.
14
Fuel Delivery Unit
‹› Removal and installation, refer to => [ Fuel Delivery Unit ] See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and
Replacement.
‹› Fuel level sensor removal and installation, refer to => [ Fuel Level Sensor ] See: Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair/Removal and Replacement.
‹› Fuel pump checking, refer to => [ Fuel Pump Checking, Engine Code BPR (Metal Fuel Tank) ] See: Fuel Delivery and Air Induction/Fuel
Pump/Testing and Inspection/Fuel Pump Checking, Engine Code BPR (Metal Fuel Tank).
‹› Clean the strainer if contaminated.
15
Bolt, 10 Nm
16
Protective Plate
17
Fuel Tank
‹› Support using the engine and transmission jack (VAG 1383A) when removing.
‹› Removal and installation, refer to => [ Fuel Tank ] See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and
Replacement.
18
Securing Strap
‹› With rubber profile and spacer sleeve.
19
Bolt, 20 Nm + 90° (1/4) additional turn
‹› Replace
20
Bolt, 20 Nm + 90° (1/4) additional turn
‹› Replace