New Beetle L5-2.5L (BPR) (2007)
/Page-2490010.png)
-
Release the catches - arrows - and pull the return spring with the slip ring from the steering column switch.
‹› Wheels must be in straight-ahead position when removing or installing return spring with slip ring.
‹› A new return spring with slip ring is secured in the center position with a cable tie.
Vehicles with ESP
-
The steering angle sensor (G85) is installed in vehicles with ESP in housing - 1 - of the return spring with slip ring.
-
Disconnect harness connectors - 1 - and - 2 -.
