New Beetle L5-2.5L (BPR) (2007)
/Page-2490023.png)
‹› All wires disconnected when removing the PODS must be reconnected correctly during installation.
‹› Before beginning work on the PODS, note how all wires are connected and routed.
-
Disconnect the battery ground cable.
-
Remove the front passenger seat (install the airbag adapter (VAS 5094)).
-
Remove bolt on inside of seat - arrow -.
-
Remove plastic rivet - 1 - at front part of seat.
-
Remove plastic cover - 2 - by unhooking at the lower part of seat - 3 -.
-
Remove the bolt - arrow -.
