New Beetle L5-2.5L (BPR) (2007)
-
Assemble thrust piece - 1 - with collar to wheel bearing, thrust sleeve - 2 - with four stepped inside diameters to wheel bearing housing, hollow
piston cylinder - 3 - with tie bolt and special nut - 4 -.
-
Pull out wheel bearing by actuating pump.
1. Thrust piece E-5
2. Thrust sleeve E-65-1
3. Hollow piston cylinder HKZ-15
4. Special nut E-8-214 and tie bolt
Pull bearing inner race off hub
Pressing in wheel bearing
-
Clean hole of wheel bearing housing.
-
Coat entire surface with Molykote grease.
Molykote grease G 052 723 A2
Use grease packet from repair kit