New Beetle L5-2.5L (BPR) (2007)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor
Transmission Output Speed Sensor
Removing
-
Remove valve body => [ Valve Body ] See: Valve Body/Service and Repair/Valve Body.
-
Remove bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195).
-
Remove sensor from housing.
Installing
Installation is in reverse order of removal. Note the following:
-
Press sensor into transmission up to stop.
-
Tighten bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195) => [ (Item 17) Bolt, 7 Nm ] See: Valve Body/Service and Repair/Valve
Body Assembly Overview.
-
Install valve body => [ Valve Body ] See: Valve Body/Service and Repair/Valve Body.