New Beetle L5-2.5L (BPR) (2007)
Headlamp Washer Spray Nozzle: Service and Repair
Headlamp Washer System
Spray Nozzle Holder and Spray Nozzles
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the ignition key.
Removing
-
Remove the front bumper.
-
Remove the screws - 4 - from the nuts - 5 -.
-
Remove the hose for the headlamp washer system - 3 - from the bracket - 2 -.
-
Pull the hose - 3 - off the spray nozzle holder - 1 -.
Installing
Install in reverse order of removal, noting the following:
-
Tighten the screws to the tightening specification. Refer to => [ Headlamp Washer System Assembly Overview ] See: Description and
Operation/Headlamp Washer System.
‹› Bleed the headlamp washer system by operating it several times after installing.